IMPACT OF CUTTING CONDITIONS ON METAL CERAMICS SURFACE
Abstract
The authors study the surface of metal powder materials and internal tensions in surface layer after finishing lathing, impact of cutting tools made of different materials on the metal ceramics’ surface after finishing process, factors of structural changes and deformation processes.
About the Authors
M. Yu. Kulikov
Moscow State University of Railway Engineering (MIIT)
Russian Federation
D.Sc. (Tech), professor
Russian Federation
D.Sc. (Tech), professor
V. E. Inozemtsev
Moscow State University of Railway Engineering (MIIT)
Russian Federation
Ph. D. student at the department of technology of transport engineering works and rolling stock repairs
Russian Federation
Ph. D. student at the department of technology of transport engineering works and rolling stock repairs
References
1. Витязь П. А., Капцевич В. М., Шелег В. К. Пористые порошковые материалы и изделия из них. – Минск: Высшая школа, 1987. 2. Анциферов В. Н., Черепанова Т. Г. Спечённые антифрикционные материалы на основе железа. – Пермь, 1977.
2. Зарипов Н. Г. Технологические основы порошковой металлургии. –Уфа: УГАТУ. 2003
Review
For citations:
Kulikov M.Yu., Inozemtsev V.E. IMPACT OF CUTTING CONDITIONS ON METAL CERAMICS SURFACE. World of Transport and Transportation. 2012;(2):44-49. (In Russ.)
Views:
158
Email this article 