Choosing the Design of an Intermediate Fastening by Vibrodiagnostics Methods
https://doi.org/10.30932/1992-3252-2016-14-4-4
Abstract
The article considers the main provisions of methods of vibration diagnostics of a railway track in the areas of conjugation of elastic intermediate rail fastenings Fossloh W14 and ZHBR65-SH, Pandrol Fastclip and KPP-5, a comparison is made according to the most important evaluation criteria of the results of vibration diagnostics with the results of passage of a track measuring car on the railway sections in Kazakhstan. The prospects for the use of vibration diagnostics on lines with high dynamic parameters of the operational load are forecasted.
About the Authors
A. V. Zamuhovsky
Moscow State University of Railway Engineering (MIIT)
Russian Federation
Russian Federation
A. M. Zhangabylova
Moscow State University of Railway Engineering (MIIT)
Russian Federation
Russian Federation
References
1. Kalay, S ., Samuels, J . Railway Track & Structures, 2002, № 3, рp . 13–16 . http://cargovibes.eu/_Uploads/dbsAttachedFiles/D0301_APT_M27.pdf. Last accessed 27 .06 .2016.
2. EN13146–3:2002 Railway applications – Track – Test methods for fastening systems – Part 3: Determination of attenuation of impact loads . [Electronic resource]: https://webshop.ds.dk/Files/Files/Products/M242496_attachPV.pdf. Last accessed 27 .06 .2016.
3. EN13481–6:2002 Railway applications – Track – Performance requirements for fastening systems – Part 6: Special fastening systems for attenuation of vibration . [Electronic resource]: http://catalogue.normdocs.ru/content?id=com.normdocs.bsi.card.dd.env.13481–6.2002. Last accessed 27 .06 .2016.
4. ISO 2017–2 Mechanical vibration and shock – Resilient mounting systems – Part 2: Technical information to be exchanged for the application of isolation vibration associated with railways systems . [Electronic resource]: http://www.iso.org/iso/home/store/catalogue_ics/catalogue_detail_ics.htm?ics1=93&ics2=100&ics3=&csnumber=36647. Last accessed 27 .06 .2016.
5. NS8176:1999 Vibration and shock – Measurement of vibration in buildings from land based transport and guidance for evaluation of its effects on human beings . [Electronic resource]: http://www.aucklandcouncil.govt.nz/EN/planspoliciesprojects/plansstrategies/unitaryplan/Documents/Section32report/Appendices/Appendix%203.43.2.pdf. Last accessed 27 .06 .2016.
6. Shakhunyants, G . M . Railway track [Zheleznodorozhnyj put’] . Moscow, Transport publ ., 1987, 236 p .
7. Instructions for decoding tapes and assessment of the state of the track on readings of a track measuring car TSNII-2 and measures to ensure traffic safety [Instrukcija po rasshifrovke lent i ocenke sostojanija rel’sovoj kolei po pokazanijam puteizmeritel’nogo vagona CNII-2 i meram po obespecheniju bezopasnosti dvizhenija poezdov] . Moscow, Transport publ ., 1997, 42 p.
8. Instruction for the current maintenance of railway track (CP-774) [Instrukcija po tekushhemu soderzhaniju zheleznodorozhnogo puti (CP-774)] . Approved by Railway Ministry dated 01 .06 .2000 .
9. Method of automatic assessment of the state of the track gauge according to the instruction CPU-515 . NPC Infotrans 1998 [Metodika avtomaticheskoj ocenki sostojanija rel’sovoj kolei po Instrukcii CP-515. NPC Infotrans 1998 g.]. Approved by CPU MPS30.10.1998.
Review
For citations:
Zamuhovsky A.V., Zhangabylova A.M. Choosing the Design of an Intermediate Fastening by Vibrodiagnostics Methods. World of Transport and Transportation. 2016;14(4):32-40. https://doi.org/10.30932/1992-3252-2016-14-4-4
Views:
305
Email this article 